Defining slab under orthotropic is default approach. By modeling panel & bar element is equivalent approach. Both are ok, but in case of bar elements you can check analytical result for ribbed beam in details.
If it is only plaster crack then remove plaster, use wire mesh at then plaster it with proper mortar. If wall crack also comes then remove wall & nee to do brick work again with lintel on top of windows & doors, the plaster it. There are some solutions using chemicals, you can try these alsoRead more
Slope is the angle formed by the tangent of the curve to the horizontal axis. Just like the slope of the line. Remember 2x + y = 3? Slope is -2. While deflection is the translational movement of the beam from its original position. Maximum Y coordinate of the curve. Remember? Finding min and max poiRead more
Request for BS 5337
admin
You need to go to their official website & contact with them for student license.
Robot Structural analysis
admin
Defining slab under orthotropic is default approach. By modeling panel & bar element is equivalent approach. Both are ok, but in case of bar elements you can check analytical result for ribbed beam in details.
Is there any way to assign point spring as compression only in Etabs?
admin
New version of Etabs (v17,18,19) has the option.
wall craks
admin
If it is only plaster crack then remove plaster, use wire mesh at then plaster it with proper mortar. If wall crack also comes then remove wall & nee to do brick work again with lintel on top of windows & doors, the plaster it. There are some solutions using chemicals, you can try these alsoRead more
About thin, thick and shell slab
admin
Check this blog post- https://decode-bd.com/what-is-the-difference-between-thin-and-thick-shell/
Structural design software
admin
That is Prota Structure. Yes tutorials on it is available in my youtube channel.
can you please share design of pile cap using IS code
admin
Will upload tutorial regarding this ASAP in sha Allah.
Procedure for finding response reduction factor using time history non linear analysis?
admin
Response Reduction Factor, R depends on the code you are using. Following the code guideline you can use R.
STIFFNESS MODIFIER FOR RIBBED SLAB IN ETABS MODEL…?
admin
You can use same SMF as you consider in regular slab.
What is the difference between Slope and Deflection?
admin
Slope is the angle formed by the tangent of the curve to the horizontal axis. Just like the slope of the line. Remember 2x + y = 3? Slope is -2. While deflection is the translational movement of the beam from its original position. Maximum Y coordinate of the curve. Remember? Finding min and max poiRead more